Wire End Vise Cover – 1200mm White (Bag of 10)
Our super safe end vise cover is available in an economical bag of 10. These white covers compliment our white horse fence rail.
Our wire end vise cover provides for an attractive finish at the end of the run. They also protect your animals and passes by from the end of the wire and metal plate. Super smooth and flexible they further enhance the safety aspects of our fence system. Their flexible build provides enough give to reduce the risk of injury.
Our wire end vise covers are made in poly that is UV stabilised. This provides for long life and preserves the attractive finish.
The covers can be fitted in the 1.2 metre length provided, covering all vices on an end post. Alternatively on gate posts they can be cut into 140mm lengths, and placed over the each pair of vises to provide space for gate fittings. We also have 800mm long vise covers in stock which suit fences with either one or two rails. The 800mm long wire vise covers also provide for economical postage if the covers are being ordered by themselves, see white 800mm end vise covers.
We recommend the wire end vice covers be installed with stainless screws of 10-20mm length. (Note: Small galvanized screws are not reliable, the tightness to the thread can lead to the coating being torn of when the screws are installed). Often 4 screws per pair of vices are required, two just above the top pair and two below the bottom pair.
The hinge section, between the dome and flat side pieces provides for a variety of straining post sizes. Specifically the hinge will allow attachment to any round post 100mm diameter or greater.
For how to install these covers, see the instructions in our Frequently Asked Questions – how to cover wire end vise.
|Dimensions||130 x 18 x 15 cm|